Surface Preparation
All surfaces must be cured, clean, sound, dry and free of all dirt, dust, efflorescence, wax, oil, grease, chalk and any other contamination that would interfere with new coating adhesion. Consult our ferrous metal surface preparation recommendations or contact us for assistance. Performance will be directly related to the degree of surface preparation.
Recommended Products
| Primers: | Vers-Acryl 300 Acrylic DTM Primer |
| CoteAll Multi-Purpose Alkyd Primer |
| Primer/Finishes: | Vers-Acryl 303 Acrylic DTM Primer/Finish |
| Finishes: | Palisade Ultra Premium Exterior Acrylic Latex |
| Durango Acrylic Latex Exterior Finish | |
| EverCryl Exterior Acrylic Latex Finish |
| DTM-AT: | Finium DTM-AT Acrylic |
The products above are commonly recommended for ferrous metal. Other Diamond Vogel products, including zinc-rich primers, epoxies and polyurethanes from our High Performance Coatings, may be better suited for your project. Please contact your Diamond Vogel representative for personalized service.